Home Maintenance
Tips & Guides

HANDLD recently completed an undermount sink reattachment involving a stainless-steel double-bowl sink that had separated from the underside of a granite countertop. The failed material around the rim was removed, the sink was realigned and reattached, and a continuous waterproof seal was applied around the perimeter. The result was a sink sitting flush and gap-free against the granite again.

A recent HANDLD job involved an undermount stainless-steel kitchen sink that had partially detached from the underside of its countertop. The old adhesive or caulk along the rim had failed, a visible gap had opened, and the basin had dropped within the cabinet opening. HANDLD reattached the sink, and the completed repair showed the basin seated evenly again with the perimeter gap closed.

Unlike a drop-in sink that rests on the countertop, an undermount sink is secured below it. The mounting system and adhesive need to support the sink while the perimeter seal helps keep water out of the joint.

Unlike a drop-in sink, an undermount sink is installed below the countertop, so separation can be easy to overlook at first. One of the clearest warning signs is a gap developing between the sink rim and the underside of the stone.

On a completed HANDLD repair, the kitchen sink had an active drain leak and the P-trap was leaking. During the repair, heavily corroded basket strainer threads were found fused to the tailpiece.

The sink was resecured beneath the countertop using a high-strength adhesive and temporary wood supports. Those supports were to remain in place for 24 hours while the adhesive cured

For a kitchen faucet installation in Toronto, checking the shutoff valves, water connections and available space for a pull-down hose can help prevent leaks, restricted hose movement and installation-day surprises.

A leak under your kitchen sink is easy to blame on the P-trap, but that's not always where the problem starts. If water only appears when the sink is full or you notice drips near the top of the drain assembly, the basket strainer could be the real source of the leak.

A constantly running toilet may seem like a small annoyance, but it can waste hundreds of litres of water each day, increase your utility bill, and sometimes point to worn plumbing components that should be replaced before they fail completely. The good news? In many cases, the repair is straightforward when addressed early. Common Signs Your Toilet Needs Repair If you've noticed any of the following, your toilet may need attention: The toilet continues running long after flu

Cracked, peeling, or mouldy bathroom caulking can lead to costly water damage if left unchecked. Learn the essential bathroom caulking do's and don'ts, when it's time to replace it, and how to keep your bathroom protected.