Home Maintenance
Tips & Guides

On a completed HANDLD project, the dehumidifier's placement relative to an adjacent partition wall prevented the filter from being removed. The solution was to create a service opening from the opposite room and install a removable surface-mount access panel.

For a kitchen faucet installation in Toronto, checking the shutoff valves, water connections and available space for a pull-down hose can help prevent leaks, restricted hose movement and installation-day surprises.

Compatibility should also be checked before installation. Many shower heads and arms use standard connections, but it is better to confirm the existing threads and the requirements of the replacement kit rather than assume every fixture will fit.

Pilot holes had been drilled with a masonry bit, but the wall surface became damaged when the screws were driven and the shelf would not hold. HANDLD completed the installation, and the finished shelf appears level and securely mounted, with no visible chipping around the fastener locations.

Once the microwave is mounted and connected, check more than whether it powers on. Test the exhaust fan through its available speeds, operate the task light and listen for unusual vibration. On a ducted installation, duct connections should also be checked for obvious air leakage.

You have the roller blinds, the measurements look right, and installation seems straightforward—until the drill stops just behind the drywall. This is a common challenge when installing blinds in Toronto condos, where the area above a window may have concrete behind a shallow drywall finish. A recent HANDLD project involved installing three IKEA roller blinds across a three-panel Toronto condo bedroom window. The finished installation provided consistent privacy and light con

Turn Rough Basement Walls Into Useful Storage Older Toronto basements can offer plenty of potential storage space, but the walls are not always easy to work with. Exposed or uneven masonry, plumbing, outlets and mechanical equipment can make it difficult to mount shelves or organizers securely. In a basement laundry area, moisture is another consideration. One practical solution is to install pegboard on wood strapping, also called furring strips. Instead of trying to attach

Planning a Storm Door Installation in Toronto Adding a storm door seems straightforward until the new unit has to fit an existing exterior doorframe, clear the main door hardware and doorbell, seal evenly, and operate smoothly. Getting those details right matters for both weather protection and everyday use. For Toronto homeowners, a properly fitted storm door can add another layer of protection at the entrance while allowing screened ventilation during warmer months. Before

Moving out of a condo often reveals small wall repairs that need attention before handover. Screw holes from artwork, chipped drywall around windows, and uneven paint can stand out during a move-out inspection.