Installing a Lighted Medicine Cabinet With a New Bathroom Vanity

Yes, you can add a lighted medicine cabinet during a bathroom vanity replacement, even if there isn't already power above the sink. The installation may require a new electrical feed for the cabinet's lighting, along with plumbing adjustments to accommodate the replacement vanity, sink and faucet. Planning both parts of the project together helps identify what work is needed before installation begins.
In a completed HANDLD bathroom upgrade, the technician replaced an existing vanity and mirror with a new vanity, sink, faucet and mirrored medicine cabinet with integrated LED lighting. The work included installing new water supply lines, configuring the sink drain and fishing a new electrical line to power the cabinet lights.
The finished photos show the new vanity and mirrored cabinet installed, with the LED lighting illuminated.
Can You Install a Lighted Medicine Cabinet Without Existing Power?
Yes, but a lighted medicine cabinet needs an appropriate electrical connection. Unlike a standard mirror or unlit medicine cabinet, a model with integrated LED lighting requires power to operate.
If there is no suitable electrical supply at the proposed cabinet location, providing one becomes an additional part of the project.
Depending on the cabinet design and existing electrical installation, this may involve running a new electrical line or arranging a compatible power connection for the lighting system.
In HANDLD's completed project, the technician fished a new electrical line to supply the cabinet's LED lights. This allowed the illuminated cabinet to be installed as part of the vanity replacement rather than leaving the lighting disconnected.
What needs to be checked before adding power?
Before purchasing or installing a lighted medicine cabinet, establish:
Power requirements: Does the cabinet require a direct electrical connection, a separate LED driver or another specified power arrangement?
Available electrical supply: Is there a suitable existing circuit, or will additional wiring be required?
Cabinet placement: Can the electrical connection reach the intended mounting location while meeting the product's installation requirements?
Bathroom electrical safety: What circuit protection, wiring methods and installation requirements apply?
Electrical coordination: Who will perform the electrical work, and are any required notifications or inspections needed?
In Ontario, electrical installation work must follow applicable electrical safety requirements. Homeowners should arrange for a Licensed Electrical Contractor where required and have the proposed connection assessed before installation.
The cabinet's own installation instructions determine its specific electrical requirements. A product's appearance or built-in lighting does not establish how it must be wired.
What Plumbing Changes Should You Expect When Replacing a Vanity?
A new bathroom vanity does not always connect directly to the existing plumbing without adjustments.
Even when the replacement uses the same general sink location, differences in cabinet design, sink depth and drain position can affect how the plumbing fits beneath it.
Three areas deserve attention.
1. Drain alignment and configuration
The new sink's drain outlet needs to connect properly to the existing waste plumbing.
A replacement sink may position its drain differently from the original. Depending on the configuration, the installer may need to adjust or replace drain components to achieve a suitable connection.
The drain assembly should align without forcing pipes or fittings into position. Connections under stress can be harder to seal reliably.
In the documented HANDLD project, the technician removed the old drain assembly, configured the drain for the replacement sink and installed a new drain.
This is an example of why a vanity replacement should account for the plumbing beneath the cabinet, not just the visible dimensions of the new furniture.
2. Water supply lines
The hot and cold supply connections must be compatible with the replacement faucet and the existing shut-off valves.
New supply lines may be needed because the replacement faucet has different connections, the existing hoses are unsuitable for reuse or the installation requires a different arrangement.
HANDLD installed new supply lines during this vanity replacement.
For your own project, check whether the faucet includes integrated hoses or requires separate supply connectors. Confirm compatibility before buying additional parts.
Existing shut-off valves should also be checked for proper operation. If a valve cannot isolate the water or shows signs of leakage, it may require separate attention.
3. Space inside the new vanity
Cabinet drawers, shelves and internal supports can affect the available room for drain piping and water connections.
Before installation, compare the new vanity's internal layout with the location of the existing plumbing.
Pay particular attention to whether the drain and shut-off valves will remain accessible once the cabinet is installed.
Some installations may require plumbing adjustments or manufacturer-permitted cabinet modifications. Do not assume that every vanity can accommodate the existing connections unchanged.
A Completed HANDLD Project: New Vanity, Sink and LED Medicine Cabinet
A homeowner wanted to replace an existing bathroom vanity, sink and faucet with a newly purchased unit. They also wanted a mirrored storage cabinet installed above the sink, with built-in electrical lighting.
The project combined fixture replacement, cabinet assembly, plumbing connections and an electrical addition.
According to the completed work record, HANDLD carried out the following:
Removed the existing bathroom vanity and mirror.
Removed the old sink drain assembly.
Assembled and installed the replacement vanity with its sink.
Installed the new faucet.
Configured the drain and installed a new drain assembly.
Installed new water supply lines.
Assembled and mounted the mirrored medicine cabinet with integrated LED lighting.
Fished a new electrical line to power the cabinet lights.
The after photos show the replacement vanity and sink beneath the mounted medicine cabinet. Another image shows the cabinet's integrated lighting illuminated.
The important planning lesson is that the visible bathroom upgrade involved several connected systems. The new vanity needed suitable plumbing connections, while the illuminated storage cabinet needed an electrical supply.
Both requirements are worth identifying before the new fixtures are installed.
What Should You Check Before Buying a Lighted Medicine Cabinet?
Start with the cabinet's dimensions, mounting requirements and electrical specifications.
A medicine cabinet may project farther from the wall than a standard mirror. Check that it will fit comfortably above the faucet and that its doors can open without hitting nearby walls, lights or other fixtures.
Mounting requirements matter too. A mirrored storage cabinet must be secured using hardware and attachment points appropriate for its weight, wall construction and manufacturer's instructions.
For the lighting, confirm whether the cabinet requires a separate driver, where that component is permitted to be installed and how its electrical connections must remain accessible.
If the cabinet is intended to be recessed into the wall, additional planning may be necessary for framing, existing plumbing and concealed wiring. A surface-mounted installation has different considerations.
Have the proposed mounting location and electrical requirements assessed before making irreversible changes to the wall.
What Should You Check After Installation?
Once the replacement vanity and illuminated cabinet are installed, the plumbing and lighting should be checked separately.
For the sink and faucet, run both hot and cold water and inspect the accessible connections beneath the vanity. Look for moisture around the supply lines, shut-off valves and drain fittings.
Allow water to flow through the drain while checking its connections. Inspect the cabinet base for any signs of dripping.
Check the area again after normal use, including the following day, because small leaks may not be immediately noticeable.
For the medicine cabinet, confirm that it sits securely, the doors operate properly and the lighting works as intended. Electrical verification should be handled by the appropriate qualified professional.
These are recommended homeowner checks, not additional testing steps documented for the featured HANDLD installation.
Frequently Asked Questions
Do I need to replace the P-trap when installing a new bathroom vanity?
Not necessarily. The existing P-trap may be reusable if it is in suitable condition and aligns correctly with the new sink and drain assembly. If the new sink changes the drain position or the existing components are unsuitable, the drain configuration may need adjustment or replacement.
In the featured HANDLD installation, the technician configured the drain and installed a new drain assembly. The completed notes do not identify every individual drain component replaced.
Can I use the existing bathroom light wiring for an LED medicine cabinet?
Possibly, but the existing wiring cannot automatically be assumed suitable. Compatibility depends on the cabinet's electrical requirements, the existing circuit and applicable electrical rules.
An appropriately qualified electrical professional should assess whether the existing supply can be used or a different connection is required.
Should I replace the bathroom faucet supply lines when installing a new vanity?
New supply lines are often appropriate during fixture replacement, particularly when the existing hoses are worn, incompatible or unsuitable for the new configuration.
Some faucets include integrated supply lines, so replacement requirements depend on the product.
HANDLD installed new supply lines as part of the documented vanity upgrade.
Can a lighted medicine cabinet be installed on drywall?
Potentially, provided the wall and mounting system can safely support the cabinet. The correct fastening method depends on the cabinet's weight, the wall construction and the manufacturer's mounting instructions.
Do not rely on light-duty drywall anchors without confirming that they are appropriate for the installation.
Planning a Bathroom Vanity and Medicine Cabinet Upgrade?
HANDLD helps homeowners across Toronto and the GTA with bathroom vanity replacements, sink and faucet installations, and medicine cabinet mounting.
If you're planning to add an illuminated cabinet, contact HANDLD to discuss the fixture installation and any electrical work that needs to be coordinated. Sharing the vanity and medicine cabinet specifications can help identify plumbing, mounting and power requirements before work begins.





Comments